The one-time rubber mixing production line is combined with the open mill to realize the compression and mixing of the rubber compound. During the film circulation process, the two rubber materials can be oscillated back and forth along the axial direction of the roller to make the rubber compound. The mixing is uniform and the piece of rubber can be delivered to the conveyor belt of the conveyor system.
Main set description
1) Conveyor belt: It adopts high temperature resistant conveyor belt.
2) 2) Swing rubber car: There are two sets of two cars that can be operated separately. Each car is an independent belt conveyor. It can be operated along the axial direction according to the program to realize the function of the glue. The belt adopts the manual adjustment method. The axial swing uses a variable frequency motor drive chain to drive the trolley to run.
3) Belt tension device: The cylinder tension mode is adopted to ensure that the tension of the belt is the same during the empty running and the laminating operation, so that the belt works under the appropriate tension and prolong the service life of the belt.
4) Belt correcting device: The belt is quickly transmitted to the pneumatically controlled correcting device to avoid belt damage.
5) Rubber material clamping: It is clamped by the oscillating curved belt, and it is used as a flat belt for transportation without clamping. The necessary cushioning devices are provided at both ends to reduce the impact caused by the rotation.
6) Top belt: It is driven by variable frequency motor. When it is rotated, it is used as a conventional belt to transport the film. When the film is broken, the belt is reversed. The opposite direction to the open mill is used to break the rubber and transport the rubber to the belt. The next link.