Application: rubber material need to be sheeting ,then go into batch off cooler for soaking ,cooling and drying , then for lamination and stock .
4.1 Pick up device:
It is used to take up the rubber sheet from sheeting mill,the up and down of swinging frame is controlled by air cylinder,easy to handle ;the speed of take up can be adjusted by hand ,and can be matched with sheeting mill speed and the rear lifting device speed .
Access device is with belt transferring ; transmission system adopts variable frequency motor plus variable frequency speed regulator.
4.2 Pressing device:
Surfacing alloy with triplets , manual valve and pressing cylinder , through the manual valve control air cylinder to move the pressing rollers , make uncontinoused rubber sheet pressed together to keep continuous sheet producing.
4.3 Leaching pulp device :
Application : the access device shipped the film for immersion , and carry on the isolating agent . With cooling system , it can cool isolating liquid by connecting to cooling water , in order to control the isolation liquid temperature.
XPG SERIES BATCH OFF COOLER MAIN TECHNICAL SPECIFICATION
ITEM MODLE | XPG-600 | XJL-800 | XPG-900 | ||
MAX.RUBBER SHEET WIDTH | mm | 600 | 800 | 900 | |
THE THICKNESS OF THE RUBBER SHEET | mm | 4-10 | 4-10 | 6-12 | |
RUBBER SHEETING TEMPERATURE OVER ROOM TEMPERATURE AFTER COOLING | ℃ | 5 | 5 | 5 | |
LINEAR SPEED OF TAKING-IN CONVEYER | m/min | 3-35 | 3-35 | 3-35 | |
LINEAR SPEED OF SHEET HANGING BAR | m | 1-1.26 | 1-1.26 | 1-1.26 | |
HANGING HEIGHT OF THE SHEET HANGING BAR | mm | 1000 | 1200 | 1400 | |
NUMBER OF COOLING FANS | set | 12-16 | 20-32 | 24-32 | |
TOTAL POWER | KW | 16 | 20-26 | 25-35 | |
OVERALL DIMENSIONS | L | mm | 12400 | 14850-18600 | 18000-37380 |
W | mm | 2140 | 2220 | 2300 | |
H | mm | 2820 | 2860 | 2980 | |
ABOUT WEIGHT | t | ~10 | ~20 | ~30 |