Application: rubber material need to be sheeting ,then go into batch off cooler for soaking ,cooling and drying , then for lamination and stock .
4.1 Pick up device:
It is used to take up the rubber sheet from sheeting mill,the up and down of swinging frame is controlled by air cylinder,easy to handle ;the speed of take up can be adjusted by hand ,and can be matched with sheeting mill speed and the rear lifting device speed .
Access device is with belt transferring ; transmission system adopts variable frequency motor plus variable frequency speed regulator.
4.2 Pressing device:
Surfacing alloy with triplets , manual valve and pressing cylinder , through the manual valve control air cylinder to move the pressing rollers , make uncontinoused rubber sheet pressed together to keep continuous sheet producing.
4.3 Leaching pulp device :
Application : the access device shipped the film for immersion , and carry on the isolating agent . With cooling system , it can cool isolating liquid by connecting to cooling water , in order to control the isolation liquid temperature.
XPG SERIES BATCH OFF COOLER MAIN TECHNICAL SPECIFICATION
MAX.RUBBER SHEET WIDTH
THE THICKNESS OF THE RUBBER SHEET
RUBBER SHEETING TEMPERATURE OVER ROOM TEMPERATURE AFTER COOLING
LINEAR SPEED OF TAKING-IN CONVEYER
LINEAR SPEED OF SHEET HANGING BAR
HANGING HEIGHT OF THE SHEET HANGING BAR
NUMBER OF COOLING FANS