1. Structure:The film cooling line for overhead structure, rack vertical return, forced air cooling. The film cooling machine can be equipped with automatic pendulum glue, automatic laminated, weighing cutting, such as automatic sampling configuration
2. Use: This line will be mixed refine glue and refining rubber pressure out of the film coating isolation agent, cooling and laminated to deposit.
3. Feature:The produces film can replace most of CPP and BOPP plastic film and can be used as multilayer p;astic packing film for various food, angricultural and sideline products , medical treatment, presticide, chemical industry , articiles for daily use, war industry articles for use. The films with good quality and cheap.
1.take in device:
Used to take pressure in film ,according to cylinder controlled by fluctuation, operation convenience. taking in speed can be controlled by manual,it can be ascension
Take device adopts conveyor, the transmission system adopts frequency governor to control .
Equipped with triplet,manual rotary valve and pressure cylinder,adjust pressed roll according to cylinder control through the manual rotary valve,in order to Make discontinuous film compressed together and the film continuous a slice.
3.Leaching plasma device:
Function : take over the film conveying equipment undertakes immersing, and carry on isolation agent.
Equipped with cooling water pipe,through the cooling water source,Continuous cooling liquid isolation, in order to control the temperature.
4.Clame take up device:
This device through the conveyor belt with isolation liquid film will be conveyed to the air cooling section gripping.
5.Wind cooling device:
constitute:it is made of frame ,cooling fans,hook rail and Hang lever conveyor. Cooling fan selection adopts 20 axial fan,satisfy the requirements of film cooling; Hang lever are installed on the taper pin . film in hang lever.
6. Conveying laminated device:
Will the film into laminated measures, continuous fold in film seat
7.Air control part:
Take-in control,each cylinder pressure and in the action,control system adopts reliable performance with high quality products.
8. electrical control system
(1)All the wires controlled by PLC,it easy for operation ,reliable quality.
(2)The speed of production line can be through the inverter adjustment, make the film cooling line speed and host match.
(3)Fan control by the group control each motor are motor over-current protection circuit breaker, when a fault fan produced when the output signal of the fan, fault in all units and stop hair drier, just deal with a fault can be fan.
Max.rubber sheet width(mm)
The thickness of the rubber sheet(mm)
Rubber sheeting temperature over room temperature after cooling(°c)
Linear speed of taking-in conveyer(m/min)
Linear speed of sheet hanging bar(m)
Hanging height of the sheet hanging bar(mm)
Number of cooling fans(Set)
XPG SERIES BATCH OFF COOLER MAIN TECHNICAL SPECIFICATION
MAX.RUBBER SHEET WIDTH
THE THICKNESS OF THE RUBBER SHEET
RUBBER SHEETING TEMPERATURE OVER ROOM TEMPERATURE AFTER COOLING
LINEAR SPEED OF TAKING-IN CONVEYER
LINEAR SPEED OF SHEET HANGING BAR
HANGING HEIGHT OF THE SHEET HANGING BAR
NUMBER OF COOLING FANS